Shipment and storage of customized artificial stone slabs
- Categories:Artificial stone
- Author:
- Origin:
- Time of issue:2023-01-09
- Views:
(Summary description)Because customized artificial stone slabs are large and bulky products, special attention should be paid during transportation and storage.
Shipment and storage of customized artificial stone slabs
(Summary description)Because customized artificial stone slabs are large and bulky products, special attention should be paid during transportation and storage.
- Categories:Artificial stone
- Author:
- Origin:
- Time of issue:2023-01-09 16:28
- Views:
Because customized artificial stone slabs are large and bulky products, special attention should be paid during transportation and storage.
Shipment of customizedartificial stone slabs:
Loading and transportation method: generally forklift, light fork and light.
Basic rules need to be followed when handling and loading and unloading customizedartificial stone slabs:
1. When transporting, it should be handled with care. It is strictly forbidden to fall and roll. When stacking upright, the back edge must first touch the ground.
2. For products packed in wooden boxes, when loading and unloading with lifting equipment, it is advisable to lift one box each time. When handling products packed with straw ropes, the straw ropes must not be lifted.
3. When the area of a single piece of customizedartificial stone slab exceeds 0.25㎡, it must be transported upright. When large products are transported by lifting tools, the stress-bearing edges must be lined.
4. The loading and stacking should be carried out in accordance with the storage requirements, and the transportation should be stable, and collisions are strictly prohibited.
Storage of customizedartificial stone slabs:
Storage method: In principle, customizedartificial stone slabs should be stored indoors, and if they are stored outdoors, they must be covered. When the boards are stacked upright, the smooth surfaces should face each other, the inclination should not be greater than 15°, the stack height should be 1.6m, and the bottom surface and between layers must be supported by non-polluting elastic materials. When it cannot be stacked upright, the smooth surface should be facing each other, the ground should be flat and solid, the support points between layers should be on the same vertical line, and the stacking height should be 1m. The packaged products should be stacked at a height of 2m.
FLOWERONE INDUSTRY CO.,LTD
TEL/WECHAT：+86-15800635512
E-MAIL：SALES@FLOWERONE.COM.CN
OFFICE ADD： AOSHENG BUILDING,SHUITOU TOWN, NANAN CITY, FUJIAN PROVINCE,CHINA
FACTORY ADD：RENFUXIACHENG INDUSTRIAL AREA，SHUITOU TOWN, NANAN CITY, FUJIAN PROVINCE, CHINA.
